1, replace the carton packaging machinery worm gear reducer lubricants, lubricants can choose 10, 20 or 30 oil.

2, the parts after the repair of the whole machine assembly, start running, observe the normal operation of the machine. The appropriate heating drum, and put a small amount of carton packaging machinery special oil, so that it melts the inner surface of the cylinder, and then cut off all the power. If necessary, the machine can be sprayed on the appearance of paint, dry and covered with plastic paper, dry place to save.

3, if the chain is too loose, you can first take a few sections to adjust the method, if it has been seriously elongated, it should be replaced. In the use of carton machinery in accordance with a certain amount of the way and the principle of use, in accordance with a certain way of maintenance and maintenance, timely resolution of different fault problems, adjust and replace the chain should be noted: the chain joint spring card installation direction should be Chain running in the same direction, so as to avoid the impact of running, beating, and even collision off.

4, all the rolling bearings for washing and washing, and add a new grease, can be used calcium sodium grease.

5, remove all the dirt on the friction surface, especially for the chain and sprocket to be cleaned, re-filling the oil.

Carton packaging machinery maintenance and maintenance repair some technical staff to carry out maintenance and repair, to ensure that the carton machinery in the use of quality and performance in the production of cartons play an important role and value.