※structural feature: ★adopt hood suction structure,matched high pressure powerful fan. Gas supply and electrical control cabinet to focus on the same operation, the operating side full cover closed. ★High quality resin sand casting,wall thickness 200mm.Adopt independent gear box, Universal joint transmission structure. ★install the lifting trolley on the conveyor bridge,Need to use the car will tile roll assembly and pressure roller, such as convenient and quick. ★Glue roller unit structure with the overall relocation,Maintenance can sway the machine at the overall maintenance,improve the working efficiency. ★The humidity control apparatus equipped with a spray, so flute type to maintain good stability of deformation, avoid dry. ★Automatic circulation system for glue, two-cylinder pneumatic gluing device, with good cushioning effect. ★Glue department using integrated slide structure,Glue roller surface after grinding engraved with 25 lines and pit-style textured hard chrome plating. ★corrugated roller adopt high quality tungsten carbide material,diameter of the main corrugated roller¢ 320mm. ★Active force variable frequency motor drive, energy efficient, low failure rate. ★Glue wide electric adjust to changes in the width of the paper used. ★Amount of glue size with electric adjustment, touch screen display and operation of the encoder transmission coating gap, high accuracy. ★Power and operating parts with a safety net to ensure the safety of personnel in the operation of machinery. ※technical parameters: 1.effective width:1600mm/1800mm/2000mm/2200mm 2,operate direction:left or right(Determined in accordance with the customer’s facility) 3,design speed:150m/min 4,range of temperature:160—180℃ 5,air source:0.4—0.9Mpa 6,steam pressure:0.8—1.3Mpa 7equipment:L_mx3.5*W_mx1.7*H_mx2.2 ※Roller diameter parameters: 1,corrugated roller:up￠320mm down￠316mm pressure roller:￠324mm 2 ,glue roller:￠242mm fixed paste roller: ￠140mm preheat roller:￠402mm ※powered motor parameters: 1.main frequency drive motor:18.5KW rated voltage:380V 50Hz Continuous (S1) working standard 2,suction motor:11KW rated voltage:380V 50Hz Continuous (S1) working standard 3,glue reducer:100W rated voltage:380V 50Hz Continuous (S2) working standard 4,glue gap motor:250W rated voltage:380V 50Hz short(S2) working standard 5,glue pump motor:2.2KW rated voltage:380V 50Hz Continuous (S1)working standard ※Auxiliary equipment: 1,Special pulley crane configuration tile roll maintenance, convenient to use when maintenance tile roll, and fast. 2,Configuring an external guide pulley crane to lengthen the trip, in order to successfully remove the line outside the repair parts. ※Mainly purchased parts, raw materials and origin:

Name of main parts	Brands or place of origin	material
wallboard	Production by own	HT250
Transmission box	hebei	QT450
Corrugated roller		tungsten carbide
Rotation joint and Metal Hose	Fujian quanzhou yujie
Main frequency motor	Siemens
Reducer motor	Siemens
Corrugated roller and pressure roller bearing	America Timken
Seat belt bearing	Zhejiang wuhuan
High pressure fans	Shanghai yingfa motor factory
cylinder	Zhejiang sonor CSM
Solenoid valve	Zhejiang sonorCSM
traps	beijing	Inverted bucket type
contactor	France schneider
button	Zhengtai NP2 series
Air switch	French schneider
Position Sensor	JapanOMRON
Frequency controller	Taiwan delta
PLC	Taiwan delta
Human Machine Interface	Taiwan WEINVIEW or MCGS
Lose rubber pump	Hebei botou